Juki produced for a high placement rate order to reach the RX7 and Rx6 series can be achieved 265,000 cph placement speed of 4.5 meters.
RX7 series have 2 multiple head with parallel and each of the head has 16 nozzles . RX7 can be reached 75,000 cph placement rate in 1 meter width.
RX6 series have 2 multiple head and each head has 16 nozzles. RX6 is capable of a much wider range of products than the competitors, which is the smallest SMD components from the package 01005 chip up to 74*74 mm QFP and 50*180mm connector. RX6 can be achieved actual placement rate of 35,000 components per hour with the component laser centering on the head unit and can be done placement in PCB size 905 * 590 mm.
Juki | RX 6 | RX 7 | ||
Max Speed | Chip (1005) | 42000 CPH | 75000 CPH | |
Composition Sensitivity | Chip (3σ) | ± 0,040 mm | ||
QFP (3σ) | ± 0,030 mm | N/A | ||
LNC 60 | Laser | 01005″ (0402 ~ 33,5mm square) | 01005″ (0402 ~ 5mm square) | |
Component Type | Chips, Small ICs, QFP, BGA, Connectors | Chips | ||
Vision | Vision | 01005″ (0402 ~ 100mm square) (50mm * 180mm Rectangle) |
01005″ (0402 ~ 5mm square) | |
Component Type | Chips, Small ICs, QFP, BGA, Connectors | Chips | ||
Min IC | Laser | 0,65 mm | ||
Standart Vision | N/A | N/A | ||
High Vision | N/A | N/A | ||
Maximum ( L x W x T ) | 610 x 590 x 5.0 mm (L Size) 905 x 590 x 5.0 mm (LW Size) |
360 x 450 x 5.0 mm (L Size) 700 x 450 x 5.0 mm (LW Size) |
||
Module | 12 Module / 6 Module + 3 Presicion | |||
Max Feeder | 160 Feeder (Standart) | 75 Feeder (Standart) | ||
Electrical | 3 Faz (3F,1T) | 3 Faz (3F,1T) | ||
3.5 KVA | 3.3 KVA | |||
6 Bar | 6 Bar | |||
100 L/Dk | 201 L/Dk | |||
Weight | 1800 Kg | 1950 Kg | ||
Size | 1250 x 2095 x 1440 mm | 988 x 1895 x 1530 mm |